Lanxess Newsroom

The $14,000 Lesson: What I Got Wrong About Dow Corning Silicone Sealants

Posted on 2026-11-10 by Valentina Orlova

First, the context nobody explains upfront

That morning in January 2024, when the three quotes landed in my inbox, I'd been managing procurement for six years. I'd audited every invoice, negotiated with eight-plus suppliers, and built a cost-tracking spreadsheet I still update every quarter. My annual budget authority was around $310,000 — maybe $305,000, I'd have to check the system for the exact figure.

Our company occupied a slightly odd space: a pharma division and a wellness division under one roof. The pharma side had one response to every purchase request: "Does it pass compliance?" The wellness side had a different response: "How much per unit?"

When it came to silicone sealant for the new filling line upgrade, both divisions had to agree on a supplier. That alone should have told me something would go wrong.

The three quotes

Let me lay out what we got:

  • Vendor A: Dow Corning silicone sealants — $2,200 per set. Factory-sealed, freight included, two-year performance warranty, on-site technical support during installation.
  • Vendor B: "Dow Corning elastomeric coatings, authorized repack" — $1,900 per set. The quote claimed authorized repackaging status but listed no authorization number.
  • Vendor C: Glaze Coat epoxy resin — $950 per set. Standard commercial-grade epoxy with a 60°C max operating temperature.

My wellness-side counterpart saw the numbers and sent back a one-line email: "C saves us $12,500. Why are we still discussing this?"

Why indeed. As a cost controller, I understood the appeal. $950 vs $2,200 is not a nuanced difference.

The detail that changed everything

I forwarded all three technical data sheets to our process engineer and asked her to check compatibility with our steam sterilization requirements. Her response came 40 minutes later.

"C is out. 60°C max, no contest. But you should look at B's TDS. Section 4, filled materials."

I pulled up B's technical data sheet. Under "Composition," it listed "silicone polymer, fumed silica, and modified corn starch."

Corn starch. In a high-temperature silicone sealant.

Let me be clear about what corn starch does in this context. It's a filler — a cost-reduction trick. It thickens the compound and lets the manufacturer use less of the expensive silicone polymer. In low-temperature applications, it might pass as harmless. In a 150°C steam cycle, it degrades. The seal fails. And the vendor blames "harsh operating conditions."

So much for the "45% cheaper" repack option.

The communication failure that almost cost us

I called Vendor B's rep directly. "Is this an authorized Dow Corning repack? Can you send the authorization number?"

"The paperwork is in process," he said. "But I can assure you the material is genuine. We buy in bulk and repackage under license."

I said I needed the authorization number before we could proceed. He said he'd have it by Friday. Friday came and went.

Three days later, I called Dow Corning's regional technical line — their direct number is on the website, under "Contact Us" — and asked if Vendor B was listed as an authorized channel partner. The woman on the phone checked. She checked again. Then she said: "No. We don't have a repackaging agreement with that company."

Vendor B was buying drums of Dow Corning material, cutting it with fillers, and reselling it under a "repack" label. That's not authorized repackaging. That's adulteration.

What we actually bought

We went with Vendor A. The most expensive quote. The one with every fee on a single page.

I'll be honest: I signed that PO with some anxiety. $2,200 per set, ten sets, $22,000 total — compared to C at $9,500. The wellness division manager asked me to justify the difference in writing.

Here's the justification I sent:

A: $2,200/set × 10 = $22,000. Includes freight, installation support, two-year warranty. No hidden fees.

C: $950/set × 10 = $9,500. But max operating temp is 60°C. Our line requires 150°C. Failure prediction: within six months. Downtime cost: $4,000/day × 3 days = $12,000. Replacement parts and labor: $1,200. Total effective cost: $22,700. More than A.

B: $1,900/set × 10 = $19,000. Adulterated product. Compliance risk in pharma division. Rejected on technical grounds.

That math satisfied finance. But I'm not sure it satisfied the wellness side. They saw $22,000 vs $9,500 and drew their own conclusions.

The line has now run for three years without a seal failure. Vendor A's engineers came out twice more for scheduled checks. No charge.

What I took away from this

On transparent pricing

The vendor who tells you every fee upfront — even when it makes the quote look expensive — is usually the one who doesn't come back six months later with a change order. That's been my experience. Put another way: if the quote has asterisks, it's not the final number.

On the pharma vs. wellness split

In my opinion, the Big Pharma vs. Big Wellness split isn't really about money. It's about risk visibility. Pharma sees a $12,000 downtime risk because their compliance system forces them to see it. Wellness sees a $950 unit price because their system doesn't ask about downtime. Same company, different spreadsheets, completely different decision outcomes.

I've only worked in this dual-division setup. I can't speak to how this plays out in a company that only has one operating model. Maybe it's simpler. Maybe it's not.

On product lines that look similar but aren't

The Dow Corning elastomeric coatings line and the Dow Corning silicone sealants line are not interchangeable. The coatings are for surface protection — electronics, industrial enclosures, things like that. The sealants are for bonding and environmental sealing. A sales rep who conflates them either doesn't understand the products or hopes you don't.

And if anyone asks what corn starch does in an industrial sealant — it's there to save the manufacturer money, not to make your equipment last longer.

In my first year as procurement manager, I assumed "standard industrial grade" meant the same thing to every vendor. It doesn't. Cost me a $600 redo that time. This time, it could have cost $14,000. The lesson stuck either way.

Need the related report or SDS packet?

Request the current Lanxess report, safety data sheet, or technical data sheet package connected to this topic.